BITUMEN ROLL ROOF FELT, TILES VISUAL EFFECT 
Size of roll 5m in length x 1m wide, Thickness 4mm
Decorative self-adhesive material for pitched roofs with solid wood flooring. It is applied at a roof tilt angle from 3 ° to 60 °
Rolled tiles are decorative rolled roofing self-adhesive bitumen-polymer material.
Roll tiles are obtained by impregnating a strong polyester base with a bitumen-polymer binder, followed by applying a self-adhesive layer to the underside of the canvas. On the front side, colored coarse-grained sprinkling is used as protective coatings - basalt in the form of a decorative pattern, on the lower side of the canvas is a release polymer film.
Benefits:
Service life 20 years
Simple and quick installation
The strong non-decaying basis from cross-reinforced fiberglass
Colored powder from basalt rocks does not fade in the sun, is not washed out by precipitation, and significantly reduces the noise level during precipitation
Application in any climate region
Roof Care Recommendations
1. The condition of the roof must be checked in the spring and autumn.
2. It is recommended to remove leaves, branches, and other small debris from the roof with a soft brush. Use of sharp
tools are not allowed.
3. Items on the roof with sharp corners must be removed manually.
4. To ensure a free flow of water from the roof, it is necessary to clean the drain
gutters and funnels.
5. In the case of the threat of the formation of a large layer of snow, it must be cleaned using mild wooden
shovels. Snow should be removed from the roof in layers, leaving a protective layer about 100 mm thick on the roof.
6. For the purpose of prevention, it is necessary to check and, if necessary, repair installation
move, holes, cracks, and parts from metal sheets.